# BU16 one side not working

**URL:** <https://forum.intech.studio/t/bu16-one-side-not-working/832>\
**Category:** The Lounge\
**Created:** [March 12, 2026, 11:19am UTC](https://forum.intech.studio/t/bu16-one-side-not-working/832 "2026-03-12T11:19:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![user274](https://forum.intech.studio/letter_avatar_proxy/v4/letter/u/b5ac83/32.png) [@user274](https://forum.intech.studio/u/user274)\
**Post date:** [March 12, 2026, 11:19am UTC](https://forum.intech.studio/t/bu16-one-side-not-working/832/1 "2026-03-12T11:19:34Z")

</div>

Hi,

I purchased and just received a BU16 and an EF4 module, I’m just starting to learn it, I was connecting these to my DAW (Reaper) and it’s generally working.

But I found that one side of the BU16 seems to not be working. When I have the EF4 attached via USB-C and try to mate the BU16 to it, all but one side of the BU16 connects. I’ve tested this visually using the software too.

I haven’t done much testing so can’t describe much more yet, but I’ll test more tonight and post a follow-up. But I’m curious what’s the support policy/procedure on this? I just received and opened the boxes for these yesterday, never used.

Thank you

---

<div class="post-metadata">

**Author:** ![narayb](https://forum.intech.studio/letter_avatar_proxy/v4/letter/n/b2d939/32.png) [@narayb](https://forum.intech.studio/u/narayb)\
**Post date:** [March 16, 2026, 10:34am UTC](https://forum.intech.studio/t/bu16-one-side-not-working/832/2 "2026-03-16T10:34:34Z")

</div>

Are you the same user that wrote to us over mail as well?

If so, there you said you had to wait a bit more and the BU16 connected after that on that side as well. IF this issue is solved, please get back to us here as well, thank you.
