# TEK2 -\> SysEx doesn't work

**URL:** <https://forum.intech.studio/t/tek2-sysex-doesnt-work/590>\
**Category:** The Lounge\
**Created:** [August 25, 2025, 6:14pm UTC](https://forum.intech.studio/t/tek2-sysex-doesnt-work/590 "2025-08-25T18:14:40Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![MigL81](https://forum.intech.studio/letter_avatar_proxy/v4/letter/m/e99b99/32.png) [@MigL81](https://forum.intech.studio/u/MigL81)\
**Post date:** [August 25, 2025, 6:14pm UTC](https://forum.intech.studio/t/tek2-sysex-doesnt-work/590/1 "2025-08-25T18:14:40Z")

</div>

Hey Guys,

I have a TEK 2 and am trying to assign a very long SysEx command to one of the buttons to control my Roland Fantom 07. Entering the command in the corresponding field works, but as soon as I try to save it and transfer it to the controller, the entered code disappears from the field. Both the MIDI monitor in the Grid Editor and an external monitor I’m using show that the button is sending a SysEx command, but it’s not the one I entered.

What am I doing wrong?

SysEx entered (and needed):  
F0 41 10 00 00 00 5B 12 01 00 00 13 00 00 00 00 00 F7

SysEx displayed in MidiMonitor:  
f0411107ff7  
f0411000f7 (both)

Thanks

Miguel

---

<div class="post-metadata">

**Author:** ![narayb](https://forum.intech.studio/letter_avatar_proxy/v4/letter/n/b2d939/32.png) [@narayb](https://forum.intech.studio/u/narayb)\
**Post date:** [August 27, 2025, 9:31am UTC](https://forum.intech.studio/t/tek2-sysex-doesnt-work/590/2 "2025-08-27T09:31:02Z")

</div>

Hi!

It seems that the SysEx action block requires the “0x” prefix to recognize HEX values and also requires you to space your values with comma. So the above mentioned message will work when entered in the following way.

 ![image](https://forum-test.intech.studio/uploads/default/original/1X/5bd33fb6484f1e4539b7b4625d7ba6845194165a.png)

---

<div class="post-metadata">

**Author:** ![MigL81](https://forum.intech.studio/letter_avatar_proxy/v4/letter/m/e99b99/32.png) [@MigL81](https://forum.intech.studio/u/MigL81)\
**Post date:** [August 27, 2025, 3:39pm UTC](https://forum.intech.studio/t/tek2-sysex-doesnt-work/590/3 "2025-08-27T15:39:28Z")

</div>

Thanks a lot!

It worked. However, I had to prefix each of the two-digit codes with a “0x.”

😃
